[Boatanchors] Millen GDO LF - VLF coils ADDENDUM

[rbethman]

Glen,

I do have a 455Kc coil from an IF can.  The only issue I see is that it 
appears to have a ferrite "cup" around it.

I wonder *IF* I could use that to make one.  I'm trying to get to 455Kc.

Bob - N0DGN

On 3/24/2011 9:38 PM, Glen Zook wrote:
> I have the 46704 and 46705.  However, I don't have the 46702 and 46703 that cover the AM broadcast band and 160-meters.  I was going to offer to count turns, etc., so that you could make your own if you didn't find one.  However, it had been a while since I had opened the boxes in which the coils came.  The coils use high density windings (like 2.5 mH r.f. chokes) and there is no way that one can count turns!
>
> I do have the calibration chart for all 4 of the low frequency range coils.  All 4 of them are on the same piece of paper.  If you need a scanned copy of that, let me know and I can scan it and E-Mail it.  Same offer to anyone who needs the calibration chart.
>
> Glen, K9STH
>
> Website:  http://k9sth.com