[Boatanchors] HRO tuning drive outer shaft

[john fitzsimmons]

You have it misaligned and the inner dial is reaching the end of its travel, as limited by the internal springs.  Maybe this will help:  http://bama.edebris.com/download/national/pw-dial.gif

--- On Thu, 3/17/11, Ian Wilson <ianmwilson73 at gmail.com> wrote:

From: Ian Wilson <ianmwilson73 at gmail.com>
Subject: Re: [Boatanchors] HRO tuning drive outer shaft
To: boatanchors at mailman.qth.net
Date: Thursday, March 17, 2011, 1:31 PM

A list member emailed me to point out that the outer shaft turns
smoothly (i.e. is not meant to be fixed in place).

I can see now that the knob mechanism works, mostly. There are
places where the tens mechanism 'clicks' and becomes misaligned.

How on earth does this work? What needs to be done to overcome
the problem where it skips?

Amazing.

73, ian K3IMW
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com ** 


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html