[Boatanchors] swan 250

[Glen Zook]

If it was designed for the 6146B/8298A then there should be no problem.  My previous message was based on the unit being designed for either the 6146 or 6146A/8298.

Glen, K9STH

Website:  http://k9sth.com


--- On Tue, 6/22/10, RAY FRIESS <rayfrijr at msn.com> wrote:

> From: RAY FRIESS <rayfrijr at msn.com>
> Subject: Re: [Boatanchors] swan 250
> To: gzook at yahoo.com, "boatanchors" <boatanchors at mailman.qth.net>
> Date: Tuesday, June 22, 2010, 4:43 PM
> 
>  
> 
> I notice that a Swan 250 six meter rig uses 6146B tubes in
> the final.
> 
>  
> 
> What I'm wondering is if what Glen has stated about the
> swapping of 6146W tubes for them in Heathkit HF rigs also
> 
> applies to the 6146B and W versions being swapped in the
> Swan six meter rig ...   i.e. the W versions
> can sub for the
> 
> B depending on the manufacturing date of the W?
> 
>  
> 
> Ray  wa7itz
>     
>         
>           
>   
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com ** 
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>