[Boatanchors] Trio 9R-59D /DS trivia

[manualman at juno.com]

The model is the same, for the most part, as the Lafayette HE-30. There
was no service manual published for either model. The HE-30 manual has
complete alignment information.

Pete, wa2cwa
http://www.manualman.com

On Wed, 15 Dec 2010 15:43:55 -0500 (EST) bonddaleena at aol.com writes:
> 
> Hi, I recently purchased and refurbed a Trio 9R-59D. I am very, very 
> impressed with the performance of this 6 tube radio. Is there anyone 
> that might have an idea where a person might find a Service Manual?? 
> I have the Operating Manual, it's on BAMA.
> 
> For those interested, here's some 'strange things' about the radio 
> and the Manual:
> 
> 1. There is NO alignment info in the Op Manual. My radio still has 
> all the intact white paint that Trio/Lafayette used on their 
> radios.
> It plays so well, I am not going to touch it (unusual for me!!!) ha 
> ha
> 
> 2. The radio has a wired tube socket for an 0A2 regulator tube which 
> was an option! 
> 
> 3. Next to the 0A2 socket, are a couple of holes in the chassis, to 
> add a calibrator crystal socket. The Op Manual gives a schematic for 
> constructing your own solid state calibrator.
> 
> 4. A section in the Manual gives very specific directions on how to 
> "cut off a pattern path" on one of the circuit boards using a razor 
> blade. For what, I have NO idea....
> 
> 5. The Manual also states "since 1/2 of the 6AQ8 in the local 
> oscillator circuit has been left unused, it may be interesting to 
> use it as a cathode follower to feed the mixer". Again, HUH???
> 
> 6. The Manual gives hints on how to check both the audio and IF 
> stages. Good info on dial cord re-stringing, but not a word about 
> alignment..
> 
> 7. The 'theory' section speaks about the use of Mechanical 
> (Piezo-Transducer) Filters in the radio. All I could find were some 
> small, IF transformers with slugs. There are also the conventional, 
> larger IF cans in the IF chain.
> 
> My radio worked but self oscillated. ALL the paper caps were NG, the 
> electrolytic's had changed value 100% +, and one tube leaked.
> 
> I would like to find: (and willing to pay for)
> 
> A. a Service Manual
> B. a photo or scan of the label on the bottom cover that shows the 
> location of the RF, OSC, and ANT coils and caps. I only have 1/2 of 
> it.. ha ha
> 
> Thanks for the time.
> 
> ron
> N4UE