[Boatanchors] Viking II Switch Replacement

[Richard W. Solomon]

I just had a thought, since I intend to add a PTT Mod, I may not need that
switch after all.

73, Dick, W1KSZ

-----Original Message-----
>From: rbethman <rbethman at comcast.net>
>Sent: Sep 4, 2009 8:11 PM
>To: boatanchors at mailman.qth.net
>Subject: Re: [Boatanchors] Viking II Switch Replacement
>
>Dick,
>
>Looking at the manual, it appears that "almost" everything that comes 
>through the front has a nut holding it to the chassis behind the front 
>panel.
>
>So it would appear your assumption is most likely correct.
>
>Bob -- N0DGN
>
>Richard W. Solomon wrote:
>> The HV switch seems to have lost it's mind. Replacement is necessary.
>> In looking at it, I got a sinking feeling that besides the nut on the front,
>> there is another nut on the chassis. This makes me think I need to
>> remove the Front Panel, something I don't look forward to.
>>
>> Am I correct in my assumption ??
>>
>> 73, Dick, W1KSZ
>>   
>-- 
>+------------------------------------------------------------------+
>|             AM Amateur Radio Operator    NØDGN                   |   
>+------------------------------------------------------------------+
>| Bob Bethman                \\\|///     " The absence of a danger |
>|                           \\ ~ ~ //      signal does *NOT* mean  |
>| rbethman at comcast.net      (/ @ @ /)      that everything is OK " |
>+----------------------o00o---°(_)°---o00o-------------------------+
>
>______________________________________________________________
>Boatanchors mailing list
>Home: http://mailman.qth.net/mailman/listinfo/boatanchors
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Boatanchors at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html