[Boatanchors] Euro sub for 1R5/1L6

[Carl]

The DK-91 is the same as the 1R5 Henry.

The DK-96 may be a 1L6 substitute possibility with pins 5 & 6 reversed 
however there are different interelectrode capacitance differences.  Id 
have to dig out a TO schematic to see if they are critical.

Carl
KM1H

----- Original Message ----- 
From: <meils at get2net.dk>
To: <boatanchors at mailman.qth.net>
Sent: Monday, March 02, 2009 3:57 AM
Subject: [Boatanchors] Euro sub for 1R5/1LS




I checked my file-diagrams & notes and can see in a
magazine article about the Zenith Transoceanic that 1R5 was used for
replacement for the more scarce 1L6 - some modifications had to be made 
on
the 1R5 pins.

My replacement is either the DK91 and DK96 but
will have to check further as to which replaces 1L6 and 1R5,
respectively. If I recall correctly, I used a DK96.

Henry
/OZ1UF - Copen.

______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html