[Boatanchors] CG-512

[WA5CAB at cs.com]

Barrie,

I assume by "all the primary" you mean you tied 3 to 4 and took the primary 
reading from 1 to 5.  For a cross check measure 1 to 2, 2 to 3 and 4 to 5 and 
see whether the numbers jive with 1 to 2 being 50 ohms, 1 to 3 being 200 and 1 
to 5 being 500.

But assuming that 1 to 5 is 500 ohms, the impedance of half secondary would 
be (using your exact figures) 3233.4 ohms.


In a message dated 1/11/2009 1:42:21 PM Central Standard Time, 
barrie at centric.net writes: 
> Okay, I had a 12 volt transformer on the bench, so I hooked it to one 
> secondary winding.  I measured 13.3 volts in, and 5.23 out.
>   
>  This was using all of the primary, which an off-list person told me would 
> be the 500 ohm input.
>   
>  I don't really know what to do with these numbers now.
>   
>  Any help appreciated.
>  
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/boatanchors/attachments/20090111/eec0ea9a/attachment.html