[Boatanchors] Cleaning Cigarette-Stained Plastic Knobs

[Duane Fischer, W8DBF]

There have been several extensive series of posts on this topic over the 
past several years. I would suggest that you go to the HHI web site (address 
in the footer) and utilize the search feature for the archives.

If I recall correctly, and this is my best guess, check the Hallicrafters, 
Heathkit and Boat Anchors lists.

Good luck sir -

----- Original Message ----- 
From: "Mark Foltarz" <Foltarz at rocketmail.com>
To: <boatanchors at mailman.qth.net>
Sent: Monday, February 02, 2009 9:42 AM
Subject: Re: [Boatanchors] Cleaning Cigarette-Stained Plastic Knobs


> Pumice free automotive hand cleaner.
>
> I have use this for decades ( at least two !) with no negative results.
>
> for knobs : put a gob in your hand then grb the knobs and roll around 
> until coated. Wait a while to let the cleaner work ( ten minutes or so) 
> then rinse in water and dry. Make sure set screw and shaft get dry!
>
> for a panel : Apply it on, rub , wait. Wipe it off with a damp sponge. 
> Repeat until removed . Dry with shop towel.
>
> de KA4JVY
>
> Mark
>
>
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.552 / Virus Database: 270.10.15/1923 - Release Date: 
> 1/29/2009 7:13 AM
>
>