[Boatanchors] B&W 425 LPF?

[Kenneth D. Grimm, K4XL]

John Flood wrote:
> Greetings,
> Just going through a box o' stuff from the estate of a friend who passed away a while ago and came across an older B&W 435 52 Ohm LPF.  This one has S/N 101 stamped on the lable and it got me to wunderin'.  Anyone have an older one?  Or <insert fantasy here> they started at s/n 101 and I have the first one and will make millions selling it...  <back to reality> It looks beefy inside will it handle the output power from my Johnson Viking Valiant without dammage?
> John Flood
> KB1FQG
>
>   
Hi John,
While there is no data sheet on BAMA for the B&W 435 low pass filter, 
there is a catalog.  In the catalog there is a listing for a FL10/1500 
which superseded a model 425 which was rated at 1500 watts.  So, if you 
mistyped, and the filter is actually marked 425, then I would say that 
you are OK with the Valiant...and probably a good deal more.  I've got a 
couple of the things myself, but just which box they are in is a 
mystery.  I used to know where every nut and bolt, transistor, resistor 
and capacitor was.  Then I moved. :-)
73,
Ken - K4XL

-- 

Ken K4XL
k4xl at arrl.net

*** BoatAnchor Manual Archive ***
On the web at http://bama.sbc.edu and http://bama.edebris.com
FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr


No virus found in this outgoing message.
Checked by AVG - http://www.avg.com 
Version: 8.0.138 / Virus Database: 270.5.0/1558 - Release Date: 7/17/2008 9:56 AM