[Boatanchors] Eico 723

[Bill Stewart]

Hey John...tnx for the info. Would try BAMA but my dial-up is to slow. Gonna 
have to upgrade one of these days.
Also, tnx to W0QFC...Gene, Tnx for the offer but I've ordered a W7FG manual. 
Its working and have made some good contacts with it....73 de Bill K4JYS
----- Original Message ----- 
From: "John Marshall" <johnmars at mindspring.com>
To: "Bill Stewart" <bstewart at ipass.net>
Cc: <boatanchors at mailman.qth.net>
Sent: Saturday, November 11, 2006 9:39 AM
Subject: Re: [Boatanchors] Eico 723


> Hi Bill,
>
> The Eico 723 manual is available from the BAMA mirror at:
> http://bama.edebris.com/manuals/eico/723/ .  To cut to the chase, the 
> manual says to put the function switch in TUNE and peak the grid  current 
> but don't exceed 2mA.  Then switch to TRANSMIT, dip the plate  and adjust 
> loading for 120mA.  After loading, recheck the grid  current and set to 
> 1.5mA CW or 2mA phone.
>
> Good luck with this and hope to see you at Benson.
>
> 73,
> John, KU4AF
> Pittsboro, NC
>
>
>
> On Nov 10, 2006, at 3:00 PM, "Bill Stewart" <bstewart at ipass.net> wrote:
>
>> Date: Fri, 10 Nov 2006 15:00:59 -0500
>> From: "Bill Stewart" <bstewart at ipass.net>
>> Subject: [Boatanchors] Eico 723
>> To: <boatanchors at mailman.qth.net>
>> Message-ID: <006301c70502$f41b45d0$388baad1 at bill>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> Just recently got a Eico 723 w/no manual. Can anyone tell me what  the 
>> grid and plate ma. should be when properly loaded. Also, when  did it 
>> come out? Don't ya just love those iron vane meters...  Thanks...Bill 
>> K4JYS
>
>