[Boatanchors] Eico 723

[John Marshall]

Hi Bill,

The Eico 723 manual is available from the BAMA mirror at:
http://bama.edebris.com/manuals/eico/723/ .  To cut to the chase, the  
manual says to put the function switch in TUNE and peak the grid  
current but don't exceed 2mA.  Then switch to TRANSMIT, dip the plate  
and adjust loading for 120mA.  After loading, recheck the grid  
current and set to 1.5mA CW or 2mA phone.

Good luck with this and hope to see you at Benson.

73,
John, KU4AF
Pittsboro, NC



On Nov 10, 2006, at 3:00 PM, "Bill Stewart" <bstewart at ipass.net> wrote:

> Date: Fri, 10 Nov 2006 15:00:59 -0500
> From: "Bill Stewart" <bstewart at ipass.net>
> Subject: [Boatanchors] Eico 723
> To: <boatanchors at mailman.qth.net>
> Message-ID: <006301c70502$f41b45d0$388baad1 at bill>
> Content-Type: text/plain;	charset="iso-8859-1"
>
> Just recently got a Eico 723 w/no manual. Can anyone tell me what  
> the grid and plate ma. should be when properly loaded. Also, when  
> did it come out? Don't ya just love those iron vane meters...  
> Thanks...Bill K4JYS