[Boatanchors] SP-200 (T-6)

[Chuck McGregor]

Joe-
Look for two 6-32 Phillips head screws on the side of the can.  These 
screws are threaded into studs swaged to a circuit card inside the 
can.  The screws may be corroded, and if they are, the studs may spin loose 
in the circuit card.  When this happens, you must grind the head of the 
screw off with a mototool. (I've had to do this.)  Next time, I plan to put 
several drops or penetrating oil around each screw head several days before 
I try to remove the screw. When you have removed the two screws, the can 
lifts off.
73,
--Chuck  N7RHU

At 07:09 PM 7/20/2006, carolew wrote:

>On the SP-200
>How do I get inside T-6? Under the chassis, I undid the two nuts that
>fasten onto the screws that secures the shield of T-6 to the chassis.
>That did not permit me to lift the shield off T-6. It is still fastened
>on. What do I do next?


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.394 / Virus Database: 268.10.2/393 - Release Date: 7/19/2006