[Boatanchors] Relay;

[Kenneth D. Grimm, K4XL]

W. David Paperman wrote:

> Based on the information that it may be a 4000 ohm coil my catalog 
> shows the following:
>
> HG 1002 (coil = pins 7&8; common wiper = 3; NC contacts = 4,5; NO 
> contacts = 1,2) This MAY be the closest one to what you need, even if 
> it requires a bit of rewiring. It is an octal base as is the original.
>
> The HG 1004 has the same configuration with the following exception: 
> Pin 6 is connected to the case, probably for grounding (shielding) 
> purposes.
>
> Dave, W5WP

Interesting.  My HA-1 actually has the HG-1002 installed in it.
73,

-- 

Ken K4XL
k4xl at arrl.net

*** BoatAnchor Manual Archive ***
On the web at http://bama.sbc.edu and http://bama.edebris.com
FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr