[Boatanchors] Thin clear dial material

[William L Howard]

Go to the nearest UPS store where they laminate things like documents,
etc. Have them laminate nothing but you end up with a very thin sheet of
clear plastic.

Bill Howard
----- Original Message -----
From: "John King" <k5pgw at yahoo.com>
To: <boatanchors at mailman.qth.net>
Sent: Wednesday, January 19, 2005 4:54 PM
Subject: [Boatanchors] Thin clear dial material


> I need to find some thin clear plastic material to
> replace that in the tuning window of the plate tuning
> capacitor on my BC 610. The window is the same as a
> panel meter except there isn't space to put a glass
> from a panel meter in the position between the cabinet
> and the "meter case type frame". The material must be
> clear and thin. I will need to scribe a reference line
> in the center of the window material, which I can do
> with a fine pointed pen with permanent ink.
>
> Any suggestions about type of material and where it
> can be located?? The small piece needed is 2.75 inches
> by 2.75 inches. Thanks for your input and suggestions.
> 73, John, K5PGW
>
>
>
> __________________________________
> Do you Yahoo!?
> Take Yahoo! Mail with you! Get it on your mobile phone.
> http://mobile.yahoo.com/maildemo
> _______________________________________________
> Boatanchors mailing list
> Boatanchors at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/boatanchors
> ** List Administrator - Duane Fischer, W8DBF/W9WZE **
> ** For Assistance: dfischer at usol.com **
> $$ For vintage radio info, see the HCI web site $$
> http://www.w9wze.org
>
>