[Boatanchors] Thin clear dial material

[Mark Bell]

Sheet plastic like you want can be easily obtained from any hobby shop.

If you can't find it,  try squadron mail order www.squadron.com

I've got it from both places in the past.

73 Mark K3MSB

----- Original Message ----- 
From: "John King" <k5pgw at yahoo.com>
To: <boatanchors at mailman.qth.net>
Sent: Wednesday, January 19, 2005 4:54 PM
Subject: [Boatanchors] Thin clear dial material


> I need to find some thin clear plastic material to
> replace that in the tuning window of the plate tuning
> capacitor on my BC 610. The window is the same as a
> panel meter except there isn't space to put a glass
> from a panel meter in the position between the cabinet
> and the "meter case type frame". The material must be
> clear and thin. I will need to scribe a reference line
> in the center of the window material, which I can do
> with a fine pointed pen with permanent ink.
> 
> Any suggestions about type of material and where it
> can be located?? The small piece needed is 2.75 inches
> by 2.75 inches. Thanks for your input and suggestions.
> 73, John, K5PGW
> 
> 
> 
> __________________________________ 
> Do you Yahoo!? 
> Take Yahoo! Mail with you! Get it on your mobile phone. 
> http://mobile.yahoo.com/maildemo 
> _______________________________________________
> Boatanchors mailing list
> Boatanchors at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/boatanchors
> ** List Administrator - Duane Fischer, W8DBF/W9WZE **   
> ** For Assistance: dfischer at usol.com **         
> $$ For vintage radio info, see the HCI web site $$      
> http://www.w9wze.org    
> 
>