[Boatanchors] Packaging

[WBob]

I cut them with my chop saw..a 10 ft carpet tube makes around 30 little 
cylinders. I use 2-4/ deck on the front panel to insure that the knobs switches 
dials etc are not taking loads.

WBob

Heinz und Hannelore Breuer wrote:

> Hi John,
> 
> how about using empty tape rolls to protect shafts or knobs. 
> Floor carpet comes on very strong cardbox tubes but the tubes sold for
> shipping posters are probably ok also. You should be able to cut them
> with a hacksaw.
> 
> 73
> Heinz DH2FA, KM5VT
> 
> 
> John Myers wrote:
> 
>>How do you protect the front panels on BA's for shipping? I always worry
>>about the control shafts getting stressed & bent.
>>
>>John, Kd8MQ
> 
> _______________________________________________
> Boatanchors mailing list
> Boatanchors@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/boatanchors
> ** List Administrator - Duane Fischer, W8DBF/W9WZE **   
> ** For Assistance: dfischer@usol.com **         
> $$ For vintage radio info, see the HCI web site $$      
> http://www.w9wze.org    
> 
> 
>