[Azden] PCS-7500H Dead Channels

[Joe]

I think that you had said that you recently purchased this radio.  Have you opened it up to see if there is any obvious modifications done to it?  The squelch control can be turned so that you hear a click, this is for the receive decode mode.  Do not use this position unless you have the internal receive decoder board.  It will be a CommSpec TS-32 board, I really doubt if you have it.  If it is in your radio, it may be causing the problem.
 
73, Joe, K1ike

"Robert F.(Bob) Jones" <rfjones at ris.net> wrote:
When connecting an antenna I have several channels that go quiet,no busy
light or audio.Un-squelch and still quiet.I scanned these freqs with a
separate scanner and have no carriers,birdies,etc and channels sound normal.

When generating a signal on a suspect channel I get a busy light,s meter
reading but still no audio.Could have audio but I have a un-modulated sig
generator.

When removing the antenna the channel works normally.

I thought if I could re-boot to factory defaults I could at least eliminate
a software problem.

Any help from the group would be appreciated.
----- Original Message ----- 
From: 
To: 
Sent: Thursday, May 13, 2004 10:00 AM
Subject: Azden Digest, Vol 4, Issue 30


> Send Azden mailing list submissions to
> azden at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/azden
> or, via email, send a message with subject or body 'help' to
> azden-request at mailman.qth.net
>
> You can reach the person managing the list at
> azden-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Azden digest..."
>
>
> Today's Topics:
>
> 1. Re: PCS-7500H (ma.locksmith at juno.com)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 12 May 2004 09:31:48 -0400
> From: ma.locksmith at juno.com
> Subject: Re: [Azden] PCS-7500H
> To: azden at mailman.qth.net
> Message-ID: <20040512.094013.-748583.3.ma.locksmith at juno.com>
> Content-Type: text/plain; charset="us-ascii"
>
> That's because there isn't any!
>
> What is it that you want to accomplish?
>
> Ed
> K1ZOK
>
>
> On Mon, 10 May 2004 19:22:26 -0600 "Robert F.(Bob) Jones"
> writes:
> I bought this radio and have the owners manual,very vague indeed.
>
> I need the command to reset the software to initial programming.I can't
> seem to find this in the manual.
>
> Thanks in advance.
>
> Bob
> W0OXJ
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
http://mailman.qth.net/pipermail/azden/attachments/20040512/a9306538/attachment-0001.htm
>
> ------------------------------
>
> _______________________________________________
> Azden mailing list
> Azden at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/azden
>
>
> End of Azden Digest, Vol 4, Issue 30
> ************************************

_______________________________________________
Azden mailing list
Azden at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/azden
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/azden/attachments/20040513/41ce2165/attachment.htm