[Azden] PCS 2000 12 pin plug

[Keith - Foxinternet]

Thanks Ed,

Yes I have the mic and what you discribe is what I was thinking if I had to
hardware the set but mounting the plug into the case and not the mic.

But if the mic is still pluged into the unit, when the TNC keys up would it
not make the mic hot and any conversation taking place around the unit be
transmited?

Keith
KD7KPY

----- Original Message -----
From: <ma.locksmith@juno.com>
> Have you a microphone?  If so, I have an alternative method.
>
> The idea is to make the cable from the TNC as follows.  Standard 1/8 inch
> connection to the speaker jack in the rear of the set.  Terminate the
> transmit audio line/PTT with a miniature stereo plug.
>
> Then, open the microphone and find a convenient place to mount a
> miniature stereo jack.  Wire the jack to the ground-PTT-tx audio points
> within the microphone.  Reassemble the microphone.
>
> To use the set for packet, plug the mono plug into the speaker output,
> and the stereo plug into the microphone.
>
> All done, to use the set for voice, remove the plugs.
>
> Ed
> K1ZOK
>
>