[Azden] PCS 2000 12 pin plug

Wed, 8 May 2002 15:10:58 -0400

Have you a microphone?  If so, I have an alternative method.

The idea is to make the cable from the TNC as follows.  Standard 1/8 inch
connection to the speaker jack in the rear of the set.  Terminate the
transmit audio line/PTT with a miniature stereo plug.  

Then, open the microphone and find a convenient place to mount a
miniature stereo jack.  Wire the jack to the ground-PTT-tx audio points
within the microphone.  Reassemble the microphone.

To use the set for packet, plug the mono plug into the speaker output,
and the stereo plug into the microphone.

All done, to use the set for voice, remove the plugs.

Ed
K1ZOK

On Wed, 8 May 2002 11:07:41 -0700 "Keith - Foxinternet"
<[email protected]> writes:
> I want to make a mike plug for my PCS2000 so I can hook it up to an 
> TNC.
> Does anyone know where I can get the 12 pin mike plug so I do not 
> have to
> hardware the unit?
> 
> Thanks,
> Keith
> 
> KD7KPY
> 
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.