[ARC5] HP 23 for ARC5

[Mark K3MSB]

Most of us use a voltage divider for the HV, Screen and Oscillator
voltages.   Easy to build.

The HV needs to be 550V @ 200 mA at a MINIMUM.

Check the specs on your HP-23 variant.   The HP-23B has a HV rating of
700v @ 250 mA.  That should be fine using a variac in front of the HP

Mark K3MSB

On Mon, Feb 24, 2025 at 12:20 PM Russ Tine via ARC5 <arc5 at mailman.qth.net>
wrote:

> Hi Folks,
>
> I'm new to the list, and I am looking for some advice about using an HP 23
> power supply for my T-22.
>
> I still use the power supply for my HW 101, so I do not want to make any
> mods to the PS itself, I would rather add a voltage divider external to the
> PS that I could plug in for the T-22 and remove for the HP 23.
>
> Thanks in advance and 73,
>
> Russ Tine K1RWT
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20250224/952c9919/attachment-0001.html>