[ARC5] Command Set Dynamotor Studs

[scottjohnson1 at cox.net]

I have  in the past cleaned out the old rubber, and pumped the tougher grey Permatex neutral cure silicone sealant into the cavity and let it cure.

Tape the studies so they are properly aligned, allow 24 hours , and it will work like new.  I have done this with most of the command set

Stuff with good results.

 

Scott W7SVJ

 

From: arc5-bounces at mailman.qth.net <arc5-bounces at mailman.qth.net> On Behalf Of n3lll --
Sent: Saturday, April 19, 2025 12:32
To: Mark K3MSB <mark.k3msb at gmail.com>
Cc: ARC5 <arc5 at mailman.qth.net>
Subject: Re: [ARC5] Command Set Dynamotor Studs

 

I have some 3D replacements, but they are not shock mounts ... tom, N3LLL

 

On Sat, Apr 19, 2025 at 1:35 PM Mark K3MSB <mark.k3msb at gmail.com <mailto:mark.k3msb at gmail.com> > wrote:

I'm currently working on recapping my BC-453B Nav Receiver.

 

The Studs which the dynamotor base clamps lock onto are rotted and are not useable.

 



 

Can anything be done about this? 

 

This is not a critical issue for me as I do not use dynamotors with my Command sets;  Even with additional bypass capacitors and more grounding, the noise is not palatable to my ears.....

 

73 Mark K3MSB

 

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net <mailto:ARC5 at mailman.qth.net> 

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20250419/0b729c24/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 713953 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20250419/0b729c24/attachment-0001.png>