[ARC5] GRC-9 Solid State Receiver

[kn7sfz]

Thanks Wayne....I have 3 of the GRC-9s and will follow your progress 
with great interest.

Perhaps you can get that info back on a website for the likes of us to 
enjoy....I was disappointed when that original website disappeared and 
it still remains a mystery as to why.

Keep up the good work, OM!

Richard kn7sfz



On 11/5/2020 7:35 AM, Robert Eleazer wrote:
> Hue:
> I do not know if we are talking about the same data, but I have 
> schematics of plug in solid-state replacements for GRC-9 receiver 
> tubes that originally were on a website on the Internet.  I sent 
> copies to all that asked for them.  Last year I built a couple of the 
> tube replacements myself and reported on the results.  I confirmed 
> that the tube replacements are designed to use the original 105 VDC B+ 
> voltage.  The LO is working great and I started on the IF section but 
> I found I had to replace almost all of the carbon composition 
> resistors in the receiver.  I've been too tied up with other things to 
> work on it for several months and it probably will be at least January 
> before I get to resume the effort.
>
> Wayne
> WB5WSV
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20201105/c1991977/attachment.html>