[ARC5] GRC-9 Solid State Receiver

[Robert Eleazer]

Hue:

I do not know if we are talking about the same data, but I have schematics of plug in solid-state replacements for GRC-9 receiver tubes that originally were on a website on the Internet.  I sent copies to all that asked for them.  Last year I built a couple of the tube replacements myself and reported on the results.  I confirmed that the tube replacements are designed to use the original 105 VDC B+ voltage.  The LO is working great and I started on the IF section but I found I had to replace almost all of the carbon composition resistors in the receiver.  I've been too tied up with other things to work on it for several months and it probably will be at least January before I get to resume the effort. 

Wayne
WB5WSV       

---
This email has been checked for viruses by AVG.
https://www.avg.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20201105/17e47f26/attachment.html>