[ARC5] Command Set Receiver Dial Nut

[Michael Hanz]

And of course the 1930s application also included the RU set 
equivalents...:-)

On 2/4/2020 10:12 AM, Michael Hanz wrote:
> Sorry for the delay, Phil.  It's a 1/2-27 thread, the same size as the 
> thread on the tuning spline cable nut on the receiver and the dial nut 
> on the transmitter.  ARC was a big believer in reusing sizes that 
> worked well.  The thread goes back to the 1930s, and was used on the 
> SCR-183/283 dual band coil box switch and the loop/antenna switch.
>
> 73,
> Mike  KC4TOS
>
> On 2/2/2020 9:47 PM, Phillip Carpenter wrote:
>> Does anyone know what size and thread the large nut is that holds the 
>> Command Receiver dial to the variable gang tuning capacitor?
>>
>> Thanks to all who respond!
>>
>> Respectfully,
>>
>> Phillip WB4PAC
>>
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html

-- 
Michael Hanz - KC4TOS