[ARC5] RCA AVA-120 AVA Fairlead

[Craig]

David Thanks a bunch for the dimensions. There is one that you didn't 
provide, and it's either the total length of the part or the length of 
the shaft. One other question, are the screw holes all the way thru the 
shank, or are they blind holes?

Craig

KF5JOT

On 8/8/20 11:06 AM, David Stinson wrote:
>
> For those working on an RCA AVA-120 antenna reel,
> here's the original outlet fitting for the fairlead tube
> with some measurements in mm.  I don't know how
> to measure the curve that starts 3mm up from the
> flat side of the inlet end and curves for the remaining
> 3mm to the countersunk hole, but I bet
> Mike Hanz knows.
> Sorry the files are small and hard to read.
> The list restricts photos to tiny files.
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon> 
> 	Virus-free. www.avast.com 
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link> 
>
>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20200808/5ccfb6b2/attachment.html>