[ARC5] T23 tuning tool

[JOHN MCCARTY]

 Neil;
  I found some somewhat stiff clear plastic tubing that fit snug on the hex shafts. I cut the tubing into short lengthssuch that I could tune the rig with the cover on. 

73 + gud luck
John n9hrt

    On Friday, June 7, 2019, 4:28:13 PM CDT, AKLDGUY . <neilb0627 at gmail.com> wrote:  
 
 Anyone tuned up a T23/ARC-5 transmitter? What did you use to tune the slugs? I found that a 3/16" socket fits the brass hex shafts on a couple of the slugs. On the remaining slugs, the shank of the socket is too thick to enter the hole in the turret mounting bracket and the socket won't engage with the shafts. A clock-winding key might work, but I'm doubtful of finding one with a hex end. Looking for suggestions or even the offer of the proper W.E. tool.
Neil ZL1ANM______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20190608/7f1a64e6/attachment-0001.html>