[ARC5] Need info on Command Set Receiver B+ current drain

[J Mcvey]

 20 to 30 ma sounds about right
as long as you don't have a lot of leaky  caps in it.
    On Wednesday, July 17, 2019, 10:03:10 PM EDT, Bob via ARC5 <arc5 at mailman.qth.net> wrote:  
 
 Hi
    Can someone provide data on the B+ current drain on a typical Command Set receiver over the B+ range of say 150VDC to say 225 VDC

    thank you

    Bob, KE6F
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20190718/7c70d4d7/attachment.html>