[ARC5] R-23/ARC-5

[Christopher Bowne]

Some of those remote control dial plates used radium paint markings IIRC.

Sent from my iPhone

> On Feb 28, 2019, at 16:13, D C _Mac_ Macdonald <k2gkk at hotmail.com> wrote:
> 
> The dial goes onto the remote receiver tuning unit and will track the front panel frequency dial if properly set up.
> 
> The adaptor is used for local tuning of the receiver.
>  
> 73 de Mac, K2GKK/5​
> Since 30 Nov 1953​
> Oklahoma City, OK​
> USAF, Retired ('61-'81)​
> FAA, Retired ('94-'10)
> 
> From: arc5-bounces at mailman.qth.net <arc5-bounces at mailman.qth.net> on behalf of kg4kgl at gmail.com <kg4kgl at gmail.com>
> Sent: Thursday, February 28, 2019 15:05
> To: arc5 at mailman.qth.net
> Subject: [ARC5] R-23/ARC-5
>  
> 
> Good afternoon,
> 
> I recently bought a somewhat hacked on R-23. My goal is to get it working as a Q5’er with a 12SA7 pentagrid converter frontend for 80 and 40m. I also want to keep it looking as original as possible. 
> 
> I have schematic diagram in front if me and there is a part that installed that is not on the diagram. It looks like a ceramic wire wound resistor (grey in color) with USN markings. It is connected between pin7 of the 12k8 and the 12sk7 pin7 next to it. Is this a factory part?
> 
> 
> Another question. The inside of the top access cover has a small dial on it and an adapter for the front tuning mechanism. What is the dial for?
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
> Message delivered to aj1g at sbcglobal.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20190228/d7a41dd7/attachment-0001.html>