[ARC5] ARC R-19 receiver
Dennis Monticelli
dennis.monticelli at gmail.com
Wed Apr 4 15:04:56 EDT 2018
The mini bananas fit tightly but I have found no need to drill out the
jacks.
Dennis AE6C
On Wed, Apr 4, 2018 at 6:53 AM, Phillip Carpenter <carpenterpa at tds.net>
wrote:
> Steve Williams carries the correct original ARC banana plugs. I have used
> mini banana jacks before but they have to be drilled out slightly before
> the original ARC banana plugs will slide in.
>
> It is best to drill out the mini banana jacks on a drill press.
>
> Phillip W4RTX
>
> Sent from my iPhone
>
> On Apr 4, 2018, at 12:14 AM, K5MYJ <macklinbob at gmail.com> wrote:
>
> Do mini-banana plugs fit in the female connectors?
>
> Bob Macklin
> K5MYJ
> Seattle, Wa.
> "Real Radios Glow In The Dark"
>
> ----- Original Message -----
> *From:* Mike Everette via ARC5 <arc5 at mailman.qth.net>
> *To:* arc5 at mailman.qth.net ; Glenn Little WB4UIV
> <glennmaillist at bellsouth.net>
> *Sent:* Tuesday, April 03, 2018 7:45 PM
> *Subject:* Re: [ARC5] ARC R-19 receiver
>
> Hi Glenn,
>
> What you need is a book titled A User's Guide to Aircraft Radio
> Corporation Receivers, by M. W. Tausson. Search Google and you will find
> it on several web sites.
>
> I'm pretty sure the connectors are available on eBay from Steve Williams,
> KB4DMF. The only one you may actually need is the one on the rear of the
> set where it plugs into the mounting rack.
>
> There is no connector for the dynamotor plug other than the one on the
> dynamotor itself. You don't need it anyway. You can run the 28 volt
> filament and 250 volt B plus in via one of the other connectors.
>
> Look over that book; it will get you going.
>
> 73
>
> Mike
>
> WA4DLF
>
> On Tuesday, April 3, 2018, 8:48:39 PM EDT, Glenn Little WB4UIV <
> glennmaillist at bellsouth.net> wrote:
>
>
> At a local hamfest I bought a R-19 28 Volt receiver.
> It is less dynamotor.
> I think that this is a type 12 receiver, specifically a R-508.
> I have been unable to find any thing meaningful on the web for this
> receiver.
> Can any one point me to some documentation so that I can get this playing?
> I would like to find the connectors to fit the radio.
> If I cannot find them, I may be able to make some connector sockets and
> epoxy work.
> Is there a connector to fit the dynamotor connector?
>
> Thanks for any help.
>
> 73
> Glenn
> WB4UIV
>
> --
> -----------------------------------------------------------------------
> Glenn Little ARRL Technical Specialist QCWA LM 28417
> Amateur Callsign: WB4UIV wb4uiv at arrl.net AMSAT LM 2178
> QTH: Goose Creek, SC USA (EM92xx) USSVI LM NRA LM SBE ARRL TAPR
> "It is not the class of license that the Amateur holds but the class
> of the Amateur that holds the license"
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ------------------------------
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net <ARC5 at mailman.qth.net>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net <ARC5 at mailman.qth.net>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20180404/641c887a/attachment.html>
More information about the ARC5
mailing list