[ARC5] ARC R-19 receiver

[Phillip Carpenter]

Steve Williams carries the correct original ARC banana plugs. I have used mini banana jacks before but they have to be drilled out slightly before the original ARC banana plugs will slide in.

It is best to drill out the mini banana jacks on a drill press.

Phillip W4RTX 

Sent from my iPhone

> On Apr 4, 2018, at 12:14 AM, K5MYJ <macklinbob at gmail.com> wrote:
> 
> Do mini-banana plugs fit in the female connectors?
>  
> Bob Macklin
> K5MYJ
> Seattle, Wa.
> "Real Radios Glow In The Dark"
> ----- Original Message -----
> From: Mike Everette via ARC5
> To: arc5 at mailman.qth.net ; Glenn Little WB4UIV
> Sent: Tuesday, April 03, 2018 7:45 PM
> Subject: Re: [ARC5] ARC R-19 receiver
> 
> Hi Glenn,
> 
> What you need is a book titled A User's Guide to Aircraft Radio Corporation Receivers, by M. W. Tausson.  Search Google and you will find it on several web sites.
> 
> I'm pretty sure the connectors are available on eBay from Steve Williams, KB4DMF.  The only one you may actually need is the one on the rear of the set where it plugs into the mounting rack.
> 
> There is no connector for the dynamotor plug other than the one on the dynamotor itself.  You don't need it anyway.  You can run the 28 volt filament and 250 volt B plus in via one of the other connectors.
> 
> Look over that book; it will get you going.
> 
> 73
> 
> Mike
> 
> WA4DLF
> 
> On Tuesday, April 3, 2018, 8:48:39 PM EDT, Glenn Little WB4UIV <glennmaillist at bellsouth.net> wrote:
> 
> 
> At a local hamfest I bought a R-19 28 Volt receiver.
> It is less dynamotor.
> I think that this is a type 12 receiver, specifically a R-508.
> I have been unable to find any thing meaningful on the web for this 
> receiver.
> Can any one point me to some documentation so that I can get this playing?
> I would like to find the connectors to fit the radio.
> If I cannot find them, I may be able to make some connector sockets and 
> epoxy work.
> Is there a connector to fit the dynamotor connector?
> 
> Thanks for any help.
> 
> 73
> Glenn
> WB4UIV
> 
> -- 
> -----------------------------------------------------------------------
> Glenn Little                ARRL Technical Specialist  QCWA  LM 28417
> Amateur Callsign:  WB4UIV            wb4uiv at arrl.net    AMSAT LM 2178
> QTH:  Goose Creek, SC USA (EM92xx)  USSVI LM  NRA LM  SBE ARRL TAPR
> "It is not the class of license that the Amateur holds but the class
> of the Amateur that holds the license"
> 
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20180404/db2836ba/attachment-0001.html>