[ARC5] Power plug for BC-453-B

[WA5CAB at cs.com]

I think that the miniature banana sockets are still made by Pomona and you 
should be able to get them from a number of distributors.  While you're at 
it, the males are also available.  One of those plus a connector salvaged 
from a gutted ARA or SCR-274-N (-A suffix only) will make a plug that fits the 
connector on the rear of the receivers and all but the AN/ARC-5 transmitters 
(for the ARC-5 ones, use one of the IFT plugs)..

In a message dated 06/01/2017 11:19:58 AM Central Daylight Time, 
arc5 at mailman.qth.net writes: 
> I found a brass  tube with the correct inside diameter that slides right 
> over the banana plug.   I have a back burner project of making a power 
> supply circuit on an aluminum plate that plugs in just like a Dynomotoer.  
> 
> 
> 
> Yo can make a plug from three sections of the brass tubing, a piece of 
> clad and some heat shrink.   If you are interested I will send the mcMaster 
> Carr part number for the brass tune and I might even have a spare one to send 
> you
> 
> 
> Bruce
> 
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20170601/b2d0b3fc/attachment.html>