[ARC5] Power plug for BC-453-B

[Bruce Long]

I found a brass  tube with the correct inside diameter that slides right over the banana plug.   I have a back burner project of making a power supply circuit on an aluminum plate that plugs in just like a Dynomotoer.  

Yo can make a plug from three sections of the brass tubing, a piece of clad and some heat shrink.   If you are interested I will send the mcMaster Carr part number for the brass tune and I might even have a spare one to send you
Bruce

      From: Kenneth G. Gordon <kgordon2006 at frontier.com>
 To: Waldo Magnuson <magnuson at mac.com> 
Cc: arc5 at mailman.qth.net; Arc5 at mailman.qth.n
 Sent: Wednesday, May 31, 2017 6:02 PM
 Subject: Re: [ARC5] Power plug for BC-453-B
   
On 31 May 2017 at 14:39, Waldo Magnuson wrote:

> Hi,  I'm using clip leads for power to my BC-453.  Does anyone have a
> "spare" connector which will plug into the three power pins where the
> dynamiters usually sits? Skip W7WGM

I have at least one spare. I'll send it to you, Skip.

Ken W7EKB

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20170601/165ab010/attachment.html>