[ARC5] Brian's deaf set. Has a 12SK7.

[don davis]

So, I'm following this thread and find it moderately interesting.  What I
hear is a lot of assumptions and things to check, but no feedback from Brian
- am I missing a bunch of posts from Brian that checks out the ideas from
the group?  Just wondering.  73 de don ad6pb

-----Original Message-----
From: ARC5 [mailto:arc5-bounces at mailman.qth.net] On Behalf Of Leslie Smith
Sent: Tuesday, September 27, 2016 2:49 PM
To: ARC-5 List <arc5 at mailman.qth.net>
Subject: [ARC5] Brian's deaf set. Has a 12SK7.

TO ALL

There ISN'T a 12FS7 in Brian's set - at least that's what I understand.  
(I haven't seen his set, and Brian never explicitly said "12SK7"  to
me.)  
But his set has a 12SK7.   12SK7.  Pentode, no diodes.

The misunderstanding comes from my attempt to clear up the difference
between Scott's observation that there isn't a pin #4 on the IF transformer
(correct) and Brian's comment that he fed the signal to pin #4.  

Brian's set is stock.  It uses a 12SK7.   There, I said it.

Thanks to every-one who tried to clear up the misunderstanding.


73 de Les Smith
vk2bcu at operamail.com