[ARC5] Receiver Filter Adaptor- From Pillar, Back to Post

[Mike Feher]

I was going to suggest the same thing, however realized that to do that he
needs to modify the radio. It will not simply be plug and play. I wonder if
a 0.01 across the zener might help. 73 - Mike 

Mike B. Feher, N4FS
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960 


-----Original Message-----
From: ARC5 [mailto:arc5-bounces at mailman.qth.net] On Behalf Of AKLDGUY .
Sent: Thursday, February 18, 2016 4:33 AM
To: David Stinson
Cc: ARC-5
Subject: Re: [ARC5] Receiver Filter Adaptor- From Pillar, Back to Post

Oh dear.
The zener shouldn't be anywhere near a signal path.
Take the zener out of there and put it on the B+ side of the IFT before the
decoupling cap.

73 de Neil ZL1ANM


On 2/18/16, David Stinson <arc5 at ix.netcom.com> wrote:
> ----- Original Message -----
> From: "'AKLDGUY .' neilb0627 at gmail.com
> Subject: Re: Receiver Filter Adaptor- From Pillar, Back to Post
>
>
>> How is V2's output taken off? Is there an IFT that isn't shown?
>
>
> Here's how the adaptor looks "in situ."
> Blue parts are original circuit elements.
> http://home.netcom.com/~arc5/TCS/AdaptorInSitu1.jpg
> While resistor values can be adjusted to an extent, the circuits shown 
> in blue may not be changed.
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html