[ARC5] Receiver Filter Adaptor- From Pillar, Back to Post

[AKLDGUY .]

Oh dear.
The zener shouldn't be anywhere near a signal path.
Take the zener out of there and put it on the B+ side
of the IFT before the decoupling cap.

73 de Neil ZL1ANM


On 2/18/16, David Stinson <arc5 at ix.netcom.com> wrote:
> ----- Original Message -----
> From: "'AKLDGUY .' neilb0627 at gmail.com
> Subject: Re: Receiver Filter Adaptor- From Pillar, Back to Post
>
>
>> How is V2's output taken off? Is there an IFT that isn't shown?
>
>
> Here's how the adaptor looks "in situ."
> Blue parts are original circuit elements.
> http://home.netcom.com/~arc5/TCS/AdaptorInSitu1.jpg
> While resistor values can be adjusted to an extent,
> the circuits shown in blue may not be changed.
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>