[ARC5] Dynamotors.

[Clare Owens]

Could they be from the TCS 12V dynamotor set?  I have one of them, with two
dynamotors, one for the receiver and one for the transmitter, but I can't
get to it right now.

Clare

On Thu, Feb 19, 2015 at 7:20 PM, Kenneth G. Gordon <kgordon2006 at frontier.com
> wrote:

> On 19 Feb 2015 at 21:52, J Mcvey wrote:
>
> >
> > "I also have two "new" 12VDC input, 600 VDC at 200 mA output dynamotors
> > I'll use for the transmitters."
> >
> > Could you share the model number of this dynamotor? What system is is it
> > from?  My scr-274 series are converted to 12V, but the dynamotor that I
> have is
> > only 440 volts, @ 200 ma. That's all I could find...
>
> Sure. I have two: they are both Stromberg-Carlson Dynamotor 42486, 12V
> 16.8 amps input, 680 VDC at 210 mA output, MPF-4-45.
>
> These were made by Webster Products
>
> They have the US Navy anchor stamp on them. Neither one have the
> end-bells on them, so I am going to have to make some new ones for them
> before I use them. They have never been used.
>
> These were part of a load of "junque" I got from our University's EE
> department when they were cleaning a bunch of that out.
>
> They were obviously for some sort of military, U.S. Navy, transmitter, but
> I
> have no idea which one.
>
> Maybe WA5CAB might know.
>
> I did a search on eBay for dynamotors too, and found two 12V jobs which
> output 500 VDC at 200 mA.
>
> I also found two 6V input jobs which output 600 VDC at 200 mA. I suppose
> you could connect the inputs in series and the outputs in parallel...
>
> Ken W7EKB
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>