[ARC5] Command set connector

[WA5CAB at cs.com]

Peter,

If you have some junker receiver chassis that are NOT B-model SCR-274-N, 
the three connectors for the IF transformers fit the ARC-5 transmitters and 
the three for the RF coil rack fit everthing else.  You just have to drill one 
hole in the center for the 8th pin.  

To remove the connectors from the chassis, use the smallest size of Xcelite 
end cutters (with green handles) to pry up the crimp.

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480

In a message dated 12/17/2015 23:00:45 PM Central Standard Time, 
k.malsch at comcast.net writes: 
> Hi guy's
> I found a way to make RX/TX connectors. The Connectors for the newer 
> systems are ceramic backed and the pins are inserted with screws and 
> nuts and can be removed easy.  By holding a piece of paper to the rear 
> socket of a Transmitter and pushing with a pencil into the sockets you 
> make a sample which can be used to drill the holes for the pins into a 
> piece of pertinax or similar plastic material. The sockets are miniature 
> banana jacks.
> See the attachment.
> To all a merry Christmas and a happy New Year.
> 
> Peter KC0DGM
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20151218/8fdf4051/attachment.html>