[ARC5] Parts needed for ARC-5/274-N

[Roy Morgan]

On May 24, 2014, at 6:22 PM, D. Platt <jeepp at comcast.net> wrote:

> ... I tried to make a 1/4" extension with copper tubing, using a male spline end as a die. Soo far, all I have is a mess…..

If you can get a male part free of the assembly, a copper or brass tube fitted with a glob of JB Weld, and oil on the male part might yield a workable female spline end.

Roy

Roy Morgan
RoyMorgan at alum.mit.edu
K1LKY Since 1958