[ARC5] ARC-2 Defines "Broad as a Barn"

Geoff geoffrey at jeremy.mv.com
Sat Mar 22 14:54:09 EDT 2014


Considering what was being used then for transmitting that sounds about 
right. Remember, there wasnt much QRM to deal with either.

Carl


----- Original Message ----- 
From: "David Stinson" <arc5 at ix.netcom.com>
To: "ARC-5" <arc5 at mailman.qth.net>
Cc: "ARC-5 Yahoo" <ARC-5radio at yahoogroups.com>
Sent: Saturday, March 22, 2014 1:33 AM
Subject: [ARC5] ARC-2 Defines "Broad as a Barn"


> So now to see what can be done (non-destructively) to "tighten-up" the 
> selectivity of the ARC-2.
> First thing to do is see just how "wide" it really is.
>
> My test equipment and budget are quite limited, so here's what I did.  If 
> you can think of a better way
> that doesn't include me buying $400 logic analyzers,
> I'm "all ears."
> I put a scope on the speaker connection
> and used my restored LM freq meter to inject a
> modulated signal at 3890KC at a level that would not
> engage AVC action.  Adjusted the signal and scope
> to show 4V PTP.   Using my TR-7 as an external frequency standard,  I 
> varied the the LM in 1KC steps
> around the center freq.
> I have not done any alignment on the IF, so the results shown in this 
> chart are "as found:"
> http://home.netcom.com/~arc5/ARC-2/ARC2IFOrig.jpg
> I think "W-I-D-E" is putting it mildly ;-).
> So this is my starting-point for my fiddling-to-come.
>
> Impressions, suggestions?
>
> 73 DE Dave AB5S
>
>
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4336 / Virus Database: 3722/7229 - Release Date: 03/21/14
> 



More information about the ARC5 mailing list