[ARC5] What the......?

[J. Forster]

Thank you. Not essential then. Kinda like the accessory connectror on the
ARB.

-John

==============


> On 3/14/2014 10:15 PM, J. Forster wrote:
>
>> Does anyone have a link to the Type 12 Maint. Manual. I'm curious about
>> the connector in the place where the ARC-5s have the frequency dial. I
>> assume the other connectors are Power and Control Box.
>
> This connector provides for B+ transfer when used with a transmitter.
>
> In the type 12 sets, the receiver dynamotor also powers the
> transmitter(s).  B+ from the dynamotor goes to pin A, B+ returns
> from the T-R relay in the transmitter(s)and goes to pin E.
>
> B+ is removed from the entire receiver in transmit.
>
> If the receiver is not used with an associated transmitter, there
> is a jumper installed, plus a cap on the connector.
>
> This connector also has LV, Tel, and Ground, but the system
> wiring diagrams in the manual do not show that they are used.
>
> Jack Antonio WA7DIA/w
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>