[ARC5] Brass tubing that fits ARC5 receiver dynomotor plate pins

[Bruce Long]

Thats interesting John  I frequency many true value and Ace hardware stores in se PA and Northern VA and have never seen such tubing.   Does not mean you are wrong....





On Friday, March 14, 2014 12:32 PM, J. Forster <jfor at quikus.com> wrote:
 
Many chain (Ace & Tru- Value) hardware stores have displays of the stuff
in 12" lengths. Usually near the Nuts & Bolts displays.

-John


============


> Hello all
> Sorry for the delay  As promised here is the information for brass tubing
> that fits the ARC5 receiver dynomotor plug pins
>
> Brass Tubing  1/8" OD  ID .097"  Wall thickness  .014"
>
> McMaster Carr part number  8859K19
>
> Vendor  K&S Engineering Stock Number 127
>
> If you are lucky enough to have a hobby store nearby that stocks
> telescoping brass tubing that tubing likely has K&S part numbers.  
> Otherwise McM is your friend
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>