[ARC5] ARC-5 T-20 Frequency coverage and other questions

[David Stinson]

Moving the MO down a full MC would not give you 
KC-for-KC dial calibration.   As you go up or down in 
frequency, the change per degree of rotation also changes.
The T-20 covers 1300 KC for a full rotation.
The T-19 covers only 1000, so your dial calibration 
would not track over even a short range.

I have moved T-20 and BC-457 down to 80 mtrs before
but don't remember how much I changed the MO cap
or the PA padder.  I do remember I removed the lock screws
and I could move the MO down enough with a small screw
driver through the hole on the side, so it didn't need to go 
"full mesh."  Neither did the PA padder. 
 I put 4 MC at the "top" end of the scale and 
made a "tuning chart."  Worked well.

GL OM ES 73 DE Dave AB5S