[ARC5] SCR-183/-283 4-5 MC Coil on 75 MTRs

[AKLDGUY .]

> My only other suggestion is to put the 1626 on a valve tester, vary the
plate Voltage and the grid Voltage and plot actual
> plate characteristics. Then draw your Class C load line.
>
> 73 de Brian, VK2GCE.

Thanks Brian, but that's a lot of work, even if a valve tester was
available. David says there were no adverse effects when using the stock
BC-230 bias resistors, so that's what I'll initially try if the project
gets off the ground.

73 de Neil ZL1ANM