[ARC5] ARB 'Conversion' Question

[Tim]

"Perhaps it is just easier to say "remove ...." rather than "disconnect the
red-white wire from pin 2 of the V-101 socket."
I would guess that none of those who wrote such articles were ever involved
in Explosive Ordnance Disposal, or if they were, not for long."

Eennie meenie minny mo - cut the red one, watch it blow.... ;o)


On Thu, Apr 17, 2014 at 4:04 AM, Robert Eleazer <releazer at earthlink.net>wrote:

> I assume it is for the same reason that the ham conversion of the VHF
> ARC-5 receiver says to remove all of the crystal sockets, relays and
> associated wiring, even though neither the space made available nor any of
> the hardware thus obtained either is needed for the conversion or
> interferes with it.
>
> Perhaps it is just easier to say "remove ...." rather than "disconnect the
> red-white wire from pin 2 of the V-101 socket."
>
> I would guess that none of those who wrote such articles were ever
> involved in Explosive Ordnance Disposal, or if they were, not for long.
>
> Wayne
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>