[ARC5] BC-696-A Inductor Scale_capacitor rebuild

[Jay Coward]

Yes, it's an arbitrary scale for logging purposes. ARC-5 and SCR/ATA are different from each other but probably the same for each tx in their respective series. So find a "parter" with a good window scale. You'll get your bearings too most likely or a replacement part all together. But the knowledge that you can rebuild one of these capacitors is good stuff to have "under your belt".
Jay


-----Original Message-----
From: Tom Elmore <tom at telmore.com>
To: ARC5 <ARC5 at mailman.qth.net>
Sent: Wed, Nov 27, 2013 4:34 pm
Subject: [ARC5] BC-696-A Inductor Scale


Does anyone know if there is a scale in the roller inductor window of the
BC-696-A?  I just replaced the window and it seems like there should be
something in there to indentify the position of the roller inductor.  

 

 

 

 

 

Thank You 

 

Tom Elmore KA1NVZ

Anchorage, Alaska 

 

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html