[ARC5] Receiver input impedance.

[D. Platt]

And I quote:  "Connect 5 ohm signal generator source to the "A" antenna 
post.  (Connect to "L" antenna post on those receivers having two 
antenna posts, one marked "A" and one marked "L")."  This is from an 
original ARC book.  Any help?

Jeep - K3HVG


On 10/30/2012 3:30 PM, Kenneth G. Gordon wrote:
> Does anyone have accurate data on the BC-453B receivers' antenna input
> impedance?
>
> I need to build an UN-BAL to match my BC-453B to a 3 foot diameter
> Stoddart loop which is fed with twin-ax.
>
> I have the Stoddart data, but need the other data.
>
> My particular BC-453B does not have the loop connections.
>
> Can anyone help?
>
> Kenneth G. Gordon W7EKB
>
> "Courage is being scared to death but saddling up anyway."--- John   Wayne
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ---------------------------------------------------------------------------------------------------
> Text inserted by Panda IS 2012:
>
>   This message has NOT been classified as spam. If it is unsolicited mail (spam), click on the following link to reclassify it: http://localhost:6083/Panda?ID=pav_13298&SPAM=true&path=C:\Documents%20and%20Settings\Doran\Local%20Settings\Application%20Data\Panda%20Security\Panda%20Internet%20Security%202012\AntiSpam
> ---------------------------------------------------------------------------------------------------
>
>