[ARC5] ARC-5 Screw Removal

[Robert Eleazer]

Woke up this morning with an idea for brass screw removal.

1.  Take a large capacity 5VDC power supply (I have one good for 100 amps).
B.  Take a suitable length of brass rod of the correct diameter obtained at a hardware store.
III.  Weld the brass rod to the end of the torqued off screw and extract that way after applying the white vinegar trick.

Don't know if it will work, but O Dark Thirty this morning it sure sounded good.

Wayne
WB5WSV