[ARC5] YG/ZB Demo

[Michael A. Bittner]

Here's a TS-1/ARR-1: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170658837667&ssPageName=STRK:MEWAX:IT  No relation to the seller, etc.  The TS-1 has only a single BCB channel.  The T-24A has all six YG channels.  Channel freqs in either one are tunable.  Mike, W6MAB
  ----- Original Message ----- 
  From: David Stinson 
  To: ARC-5 List 
  Sent: Sunday, July 03, 2011 9:10 AM
  Subject: [ARC5] YG/ZB Demo


  I've been "noodling" about how to demo this system
  in it's original state. I have all the bits and pieces and 
  a "build board" all ready for it, so I can connect it to 
  my other various sets. But how to demo it?

  OK all you "smarter than me" people- 
  I've another hair-brained idea. 
  Suppose I build a YG signal source.
  Very low power. I mean microwatts.
  Build a rotating cylindrical shield with resonant slot
  for radiation. 1/4 wave slot would be about a foot long.
  Drive the can rotation along with an 8-segment switch
  to change code char. for each segment. Radiating stub
  in the can. See diagram:

  http://home.netcom.com/~arc5/gfru/zbdemo.jpg

  The ZB should only hear the demo signal when its
  antenna is in view of the slot. Move the demo transmitter around
  and you get a different code. 
  What a cool show it would make at a hamfest presentation.
  But will it work?

  73 Dave S.

  ______________________________________________________________
  ARC5 mailing list
  Home: http://mailman.qth.net/mailman/listinfo/arc5
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:ARC5 at mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html