[ARC5] Dynamotors

[Mike Feher]

I still have quite a few of the 12 volt dynamotors NOS with the 3 pin mounts
that fit and work fine. Only thing is, the ARC-5 has to be modified for 12
volts, or feed only 12 volts to the dynamotor via a large power resistor, or
regulator. - Mike

 
 
Mike B. Feher, N4FS
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960
 
 
-----Original Message-----
From: arc5-bounces at mailman.qth.net [mailto:arc5-bounces at mailman.qth.net] On
Behalf Of David
Sent: Saturday, June 21, 2008 6:04 PM
To: ARC5 at mailman.qth.net
Subject: [ARC5] Dynamotors

Can anyone tell where all the dynamotors for the command sets end up going. 
I have looked at dozens of them on ebay and they don't have the dynamotors.
Thanks

Dave   VA7DG 

_______________________________________________
ARC5 mailing list
ARC5 at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/arc5