[ARC5] Dynamotor prep?

[Ed Zeranski]

> > Other than checking brushes and cleaning/lubing bearings, is there
> > anything else I should before firing up a Dynamotor?

Inside the end bells on the TCS dynamotors they specify ANDOC C for the
grease, the stuff is still made but the smallest quantity I could find was a
case of  24 cartridges so went with the Mobilith SHC-100 highspeed grease
Mike Hanz suggested. So far so good, happy TCS. As long as you can read the
bearing race # a bearing house can usually get a replacement bearing.

EdZ